-
It sounds like chipmonks! Audio plays back too fast
The problem is not with our software, but with the MP3 file you are trying to import into the My Website Talks software.
The Macromedia Flash player has a problem playing files that are encoded at a rate that is not a multiple of 11.025 kHz. This effect is sometimes called the “chipmunk” effect: the file is played at double speed. To avoid this, encode your MP3s at 11.025 kHz 22.050 kHz or 44.100 kHz.
The issue with the "chimpmonk" effect is due to the way that your mp3 was originally encoded. My Website Talks software creates Macromedia Flash files which are encoded correctly to work with all Macromedia Flash enabled browsers.
If you're using your own Mp3 files, some mp3 encoders use "non-standard" encoding technics that Macromdia Flash can not handle... and play back too fast. I have only been able to reproduce the "chimpmonk" effect while using musicmatch's mp3PRO setting. The standard mp3 setting in musicmatch works fine, but when a file is encoded with the mp3PRO setting the file plays back with the "chimpmonk" effect...
We have been unable to find documentation on this issue on Macromedia's web site. This issue is not a fault of our software, but rather an issue with the Flash plugin. The only solution i can offer at the moment is to re-encode your mp3's with a standard mp3 encoder. Our software will support the playback of most any standard encoding and any bitrate, just be sure that you don't use mp3PRO encoding.
There are many MP3 encoders, each has different sample rates, so we cannot confirm for sure if the one you are using will work properly with Macromedia's flash. This will depend on the conversion software/ MP3 format you are using or converting.
You may have to play with different conversion programs/formats in order for it to work properly. We don't have a definative answer of what format to convert to, because each originating format is different, and each will convert differently.
Typically, you'll need to convert your MP3 file to:
BIT RATE: 32
SAMPLE RATE: 22050
I would recommend using this free conversion app and convert your mp3 to the proper sample rate.
GOT CHIPMONKS? dbPowerAmp is a free Windows tool. Once you install it, you'll be able to right-click on an .MP3 or WAV file and select 'Convert' . You can then adjust the sample and bit rate of MP3 and WAV files. Convert from one format to another, just about every audio type is supported: mp3, mp4, Windows Media Audio (wma), Ogg Vorbis, AAC, Monkeys Audio, FLAC and many others
Grab a FREE copy on us here http://www.mywebsitetalks.com/cooltools.htm
Alternate solutions for this issue are to:
1. re-Record your message using the MWT software
2. Use a third party conversion tool to resample your mp3 files. Check
google for available options
iTunes file Fix:
You may fix the problem by going into iTunes prefs, choosing 'custom' for the MP3 encoding, and then choosing 44.1kHz for the sample rate instead of 'auto'. Apparently when iTunes uses an auto bit rate, the Flash player is unable to adjust its playing speeds to accomodate the optimized MP3 file."
Lame encoded files:
Flash plays chipmunk on a LAME encode at 40kbps mono, but works fine at 32 kbps.
[Back to top] -
Why isn't the Audio button showing up on my page?
1. The upload process did not complete properly, probably to incorrect server settings in the FTParea. All the generated files must be uploaded in the same directory as your HTML page for the player to work, or appear on your page.
Watch Uploading Files Video If you are not familiar with FTP, use our hosting service.
2. The paths in your HTML are not consistant with where the audio files are on your server. Look at the HTML your pasting into your page, look at the paths where they point to. Are those files really there?
3. Is your audio file some weird name like:
My%audio&%_-%-file.mp3
If so, you need to rename your audio files, as servers cannot read file names with odd charactors or spaces in them. Your audio files should have a simple name, like audiofile.mp3
Rename your audio files, then import those files into the software, regenerate your code, and then upload. It should work fine once your server can read the name of your file.
[Back to top]
